How to Join a Wireless Router

When connecting a Wireless Router to the Internet and to provide a WLAN (Wireless Local Network) for neighborhood connectivity, it is crucial that you firstly have a working Broadband DSL connection to the Internet via a DSL modem. A lot of non-technical men and women become confused about the difference between a wireless router and an Internet Gateway Router, that has a built-in modem and so does not require a standalone DSL modem.

How to Join a Wireless Router

Let’s assume you already have a DSL Modem and you have tested connectivity to the Internet through the modem with a PC. Now we must connect the wireless router to the DSL Modem and also set up the regional Wireless LAN to enable local devices to connect wirelessly using the device. In case you’ve got a cable modem, because your broadband support from your Internet Service Provider is a cable support then the installation is very much like having already tested the performance of this Cable Modem.

Adventure, Connection, Forest, Freedom, Grass, Hobby

In order to connect to the tepwireless.com router, your own PCs, Notebooks or even Gaming Consoles will need to encourage the IEEE 802.11 wireless standards. Quite simply they need to have a wireless NIC card built-in to the Motherboard or you’ll need to obtain a wireless adapter, the most typical being USB Wireless Adapters that are mostly Plug and Play.

Another important consideration to remember when buying your wireless router, would be to make certain that it isn’t a wireless access point, otherwise it won’t have the routing function that essential to connect your wireless devices to the web.

We are almost ready to begin linking our wireless device, so it’d be a fantastic idea to have a copy of any set-up instructions which came with this device. They will be quite similar, irrespective of the producer, but there’ll be subtle differences.

Switch off or unplug your Current DSL Modem or Cable Modem. When it is a DSL Modem then it will be connected to a phone point using a supplied telephone cable, typically via an ADSL filter. Next take the network cable supplied with your own wireless router and then plug one end into the RJ-45 receptacle on the DSL Modem (there will usually only be one). Connect the opposite end of the cable to the WAN port on your wireless router.

Most wireless routers also have 4 interfaces to let you connect 4 separate PCs through wires. The WAN port is normally distinct from the computer ports my way of colour coding or due to the fact that it is distinct from the other 4 vents.

The next step is to plug in and switch on the DSL Modem and wait few minutes to let it boot up and then synchronise with the Service Provider network via the telephone cable. Your DSL Modem will generally have a visible LED suggesting a successful connection with the Internet.

Now switch in your wireless routing apparatus that you connected to the DSL Modem, and soon a green LED will generally indicate successful connection for your Modem.

Utilize a system patch cable to connect a working PC to one of those usually 4 network ports on the wireless device. A built-in DHCP Server in the wireless router must allocate an appropriate IP Address into the PC being used for setup. Open up a browser window on your PC and type in the URL given by the producer from the address bar. For example Linksys routers normally use the URL

http://192.168.1.1/

Success should lead to the router default option page getting visible in your browser window. Your router instructions must provide you the default password and username necessary to access the key wireless router configuration. Once you have successfully entered the Username and Password, then navigate to the section which lets you change the settings and configure an admin Username and Password which you can remember. Save the configurations!!

Leave a Reply

Your email address will not be published. Required fields are marked *